Analog-way Di-VentiX - DVX8022 User Manual download pdf (Page 26)

Chapter 3 : OPERATING MODE (continued) Di-VentiX™

PAGE 26

3-1. OPERATING WITH THE REMOTE CONTROL SOFTWARE (continued)

3-1-4. OPERATING IN MATRIX MODE (continued)

• DISPLAY DEVICES ADJUSTMENTS

For each OUTPUT:

 Click on the Output tab and select the centering pattern.

 Adjust directly the display device itself, using its controls, to fill the centering pattern in full screen.

Figure 18: Centering pattern.

• IMAGE ADJUSTMENTS

For each input source connected to the device, do the following adjustments:

 Select the source you want to adjust.

 Click on the Image: output 1 or Image: output 2 tab.

 Use the Centering function to automatically position the image in the Centering pattern.

IMPORTANT:

For best results, display a full size bright image (no black border) to perform a centering. As

required, correct the adjustment with the position & size functions.

NOTE:

The centering function is only available for computer sources.

NOTE:

In case of same Input/Output resolution, the centering also achieves automatic pixel clock adjustments. It

may be useful, to improve manually the pixel clock and phase.

 If needed, do the others adjustments, available in the IMAGE menu (color, brightness…).

NOTE:

To set the image adjustments to the factory settings, use the Preset function.

NOTE:

The adjustments are automatically stored in NON-volatile memories. The Di-VentiX is provided with 40

NON-volatile image memories. Each of these memories contains the input channel number, the input and

output format parameters and all of the image adjustments (position, size, brightness...). When the 40

memories are used, each new memorization erases the oldest record.

• AUDIO ADJUSTMENTS

Click on the Audio tab, and do for each AUDIO output the following adjustment:

 Adjust the master volume.

 Select the mono or stereo audio mode.

 Select an AUDIO input (breakaway mode) or automatic (auto follow mode):

- auto follow = the audio switching follows automatically the video switching.

- breakaway = the selected audio input is permanently diffused.

 For each audio input, adjust the level (audio level) and the balance (audio balance).

IMPORTANT:

If the auxiliary audio input (AUX) is used, don't forget to activate it with (AUX input = ON).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 142 143

No comments

Analog-way Di-VentiX - DVX8022 User Manual Page 26