QUICK START GUIDE - TETRA VIO
TM
ANALOG WAY EDITION : 03/08
CONNECTIONS:
Turn OFF all of your equipment before connecting.
Connect the AC power supply cord to the TETRA VIO and to an AC power outlet.
Connect your computer & video sources to the 3 universal inputs of the TETRA VIO.
- If you need to connect a digital computer source, use the input #2 (DVI-I IN connector).
- Connect your other analog sources to the inputs #1 and AUXILIARY (front panel).
IMPORTANT: Connect only one source by input.
Connect your SDI or HDSDI video source to the input #3.
Connect your Hi-Resolution display device (projector, plasma screen...) to the HD15 connector, or connect your video display device (TV, VCR...) to
the mini DIN (S.VIDEO), BNC (composite PAL/NTSC) or HD15 connectors, or connect your DVI display device to the DVI-I connector, or connect
your digital display device to the SD/HD-SDI BNC connectors.
NOTE: -In SDTV output format, the Composite video, S-VIDEO, YUV/RGSB/RGBS, SDI & DVI signals are available simultaneously (on
respectively BNC, mini DIN, HD15, BNC & DVI connectors).
-In EDTV output format, the YUV/RGSB/RGBS & DVI signals are available simultaneously (on respectively HD15 & DVI connectors).
-In HDTV output format, the YUV/RGSB/RGBS, SDI & DVI-D YUV/RGB (16-235) signals are available simultaneously (on
respectively HD15, BNC & DVI connectors).
-In Computer output format, the RGBHV/RGBS/RGsB & DVI-D RGB (0-255) signals are available simultaneously (on respectively
HD15 & DVI connectors).
Turn ON the TETRA VIO (rear panel switch). Then turn ON all your input sources and then your display device.
• TETRA VIO connection diagram:
• HD15 connector pin assignment (inputs #1 & AUX - input #2 with the DVI/HD15 adaptor):
SETTINGS:
We recommend resetting the TETRA VIO to its default values, with the front panel display menu (CONTROL > Default values > Yes) before
proceeding.
Activate the auto-setting function (Press the SETUP front panel button or select auto-setting with the front panel display menu INPUT > Auto
setting). This function detects automatically the input type of the source connected to the input connectors. Then the device performs an auto-
centering function.
Select the Input status menu (INPUT > Input status) to verify the correct detection of the type and format of your input source. If a wrong message
is displayed, select manually the type of your input source (INPUT > Input # > Type). Renew the step for each input connected to the device.
In case of audio connection, assign the audio input to the needed video input (INPUT > Input # > Audio input).
Select the output format which corresponds to your display device with the front panel display menu (OUTPUT > Output format).
Select one of the output rate available with the front panel display menu (OUTPUT > Output rate).
Select the output type with the front panel display menu (OUTPUT > Analog type & DVI type).
For each input source connected to the TETRA VIO, make the following adjustments available in the IMAGE menu.
Comments to this Manuals