version 1.0version 4.00USER MANUALOps200
Um den Betrieb dieses Geräts zu verstehen, raten wir Ihnen vor der Inbetriebnahme alle Sicherheits und Betriebsanweisungen genau zu lesen. Diese Siche
Para comprender mejor el funcionamiento de este aparato, le recomendamos que le acuidadosamente todas las consignas de seguridad y de funcionamiento
Tabletop mounting: The OPS200 can be used directly on a table, the unit is equipped with 4 handy anti-slip rubber feet.Rack mounting: The OPS200 is co
• ANALOG COMPUTER:Connectors: Inputs #1 to #5: female HD15. Inputs #6 & #7: female DVI-I (analog pins). Line frequency: Up to 130 kHz (1
• HDTV - HD-YUV:Connectors: Inputs #1 to #5: female HD15. Inputs #6 & #7: female DVI-I (analog pins). Formats: 720p/576p (60Hz), 1080i
• ANALOG OUTPUTSConnector: Outputs #1 (Main) & #2 (Preview): female HD15, DVI-I (analog pins).Resolutions:Signals: RGBHV, RGBS and RGs
• AUDIO OUTPUT:Connector: Outputs #1 (Main) and #2 (Prelist): 2 Balanced or unbalanced mono/stereo outputs (on 5-pin MCO male connector
PHYSICALDimensions: W 482 x D 330 x H 88 mm 19”W x 13”D x 3.5”H. (Compatible with a Standard 19” rack, Height = 2U).Weight: 5 kg / 11 lbs.
Pin outs16• VGAStandard VGA1- Red 6- Red Return 11- ID Bit 02- Green 7- Green Return 12- ID Bit 13- Blue 8- Blue Return 13- H S
17If you want to use HDCP (High Denition Copy Protection) content from your sources, be sure pluging HDCP compliant screens or projectors. If it’s no
The OPS200 can be set up with up to 11 different sources, and will drive up to 2 digital DVI-D sources, 2 SD/HD-SDI sources and 7 analog computer/vide
The OPS200 rear panel is equipped with 11 universal digital and analog inputs. Inputs #1 through #5 (3) are universal analog inputs. Inputs #6 & #
UNIVERSAL COMPUTER & VIDEO INPUTS:Universal Inputs accept computer sources (RGBHV, RGBS, and RGsB (SOG) signals), standard TV/VIDEO so
RGBS VIDEO SOURCES:This signal is widely used in broadcasting and is available on European DVD player. The RGB/S signal is transmitted with 4 coaxial
MAIN OUTPUT:ANALOG: 1 x analog output for the main display device on female HD15 connector.DIGITAL/ANALOG: 1 x main output on female DVI-I conn
The highly intuitive front panel of the OPS200 was designed by Analog Way engineers to simply and quickly meet all of your event needs. Within minutes
The [STANDBY] button allows users to put the OPS200 into sleep mode, and startup again. The [STANDBY] button does not replace the ON/OFF switch at the
The [FREEZE] button of the OPS200 allows users to freeze the Main output current display or the active layer, depending on the freeze mode: Freeze Al
Pressing the MENU button in the menu section of the OPS200, will display and give you access to the following items on the menu VFD screen: - I
It is strongly recommended resetting all of the default values of your OPS200 unit before setting up your shows and events. To do so, press the [EXIT/
THANK YOUThank you for choosing Analog Way. By following these simple steps, you will be able to operate the powerful OPS200.TABLE OF CONTENTS1INTRODU
1/ In the MENU section, press the [EXIT/MENU] button and select Input in the menu by rotating the scroll knob. Then press the [ENTER] button to enter
The Output menu also allows you to generate test patterns. The test patterns available through the Output menu let you quickly and reliably setup you
It is possible to store up to 7 frames in the OPS200 non volatile memory. Frames are mainly used as backgrounds in a typical show or event setup, and
1/ In the Input Selection section, press the source button (#1 to #11) of the source you wish to record as a logo. The source button will start blink
The OPS200 offers a wide variety of transitions between the scenes you create for your shows and events. It allows for live recall of 4 user presets,
The four user presets of the OPS200 can be called back at any stage during your show or event.1/ Press the [PRESET] button, then press one of the
HOME MENU[MAIN] Format : 1920 x 1080 Rate : 50Hz Lock: Internal | MAIN | PREVIEW ---------+--------------+--------------- Logo2 | L
Cong status Autoset all Synchronized Input 1 Analog Input 2 Analog Input 3 Analog Input 4 Analog Input 5 Analog Input 6 Analog Input 6 Analog DVI 1
Output format Output rateOut Sync PolarityGammaFlicker lter (o4)Analog TypeDVI TypeHDCP DetectionBackground color 640x480 4/3 HDTV 720p 23.97
PRESETStep BackSave PresetLoad Preset Save from Save from Save to Save to Memory 1 Memory 1 Main Main Preview Preview Memory 2 Memory 2 Memory 3 Memo
OPERATING THE OPS200234-1. THE OPS200 FRONT PANEL4-2. THE OPS200 MENU4-3. WORKING WITH THE OPS200232726OverviewOn/Off buttonMenu scroll knobFreeze but
LAYER (A3)Layer adjust (b1) H Pos V Pos HV Pos H Pos HV Size (b2) V Pos H Size (b2) H Size V Size (b2) V Size Style Adjust Duration Direction N
Record LogosEraseCapture source Frame 1 (lf3) Main Frame 4 (lf3) Frame 7 (lf3) Logo 2 (lf3) Frame 3 (lf3) Preview Frame 6 (lf3) Logo 1 (lf3) Logo 7 (l
AUDIOAux. settingsAudio Main Breack away Input 1 Input 3 Input 5 Input 7 DVI 2 SDI 2 Stereo TopLayer follow Input 2 Input 4 Input 6 DVI 1 SDI 1 Master
Key lockingLCD brightnessKey brightnessStandbyReset LayersErase Memories (L2)Default values (L2) Enabled Input 1 (L3) Input 7 (L3) Input 2 (L3) DVI 1
Your OPS200 is shipped with a Windows compatible control software. The RCS software allows you to control your OPS200 in exactly the same way as with
The RCS software for your OPS200 can be viewed as the software version of the OPS200 front panel menu section. It allows you to quickly access all of
1/ Connect an RS232 cable between the OPS200 and your PC, then power on your devices.2/ Click on the RCS program le on your PC to run the software.3
Once your OPS200 is wired up to your PC, the rst step in properly conguring your machine is to individually select and parameter your inputs.1/ Clic
1/ Click on the Image tab of the RCS interface. The empty Image screen will appear on screen.2/ By clicking on the drop-down menu in the Preview sec
It is possible to store up to 8 logos in the OPS200 non volatile memory. Logos work in much the same way as frames, and can be recorded from any of th
5-2. WORKING WITH THE RCSWorking with PIPsSource input congurationSource output congurationPIP congurationWorking with logosWorking with framesWork
The OPS200 allows the creation of user dened presets very easily. Any setup you have congured on screen, can be stored into one of the 4 available u
To congure audio settings of the OPS200, plug all audio inputs into the device, and click on the Audio tab of the RCS home page.1/ Set the Main audi
OPTIONAL REMOTE CONTROL SYSTEMSAxion2: The Axion2 is an ergonomic and reliable remote controller for rental & staging/multi-venues at an optimal p
Examples are intended to make the use of the OPS200 as easy as possible, by providing visual help in setting up your equipment. In an effort to make t
If you need to use your own Software Control program from a PC or automation, the device allows communication through an ASCII code protocol. All comm
WARRANTYAll Analog Way products have a 3 year warranty on parts and labor, back to factory. This warranty does not include faults resulting from user
HOW TO CONTACT USCONTACT INFORMATIONAnalog Way SAS33 rue du Saule TrapuParc du Moulin91300 Massy FranceTel.: +33 1 64 47 16 03Fax: +33 1 64 47 14 73sa
Designs and specications are subject to change without noticeThe illustrations and screens described in this manual may be exaggerated or simplied f
BACKGROUND: a “Background” is a source, typically originating from a computer. OPS200 enables you to work with live or still (frame) background source
All of the safety and operating instructions should be read before the product is operated and should be maintained for further reference. Please foll
An de mieux comprendre le fonctionnement de cet appareil nous vous conseillons de bien lire toutes les consignes de sécurité et de fonctionnement de
Allo scopo di capire meglio il funzionamento di questa apparecchiatura vi consigliamo di leggere bene tutti i consigli di sicurezza e di funzionamento
Comments to this Manuals